Bars & Console Tables

Unknown Burl Table

This hallway/entrance/console table has firey red resin in the unidentifiable burl top, hundred year old Queensland beech bottom shelf with black resin and ironbark legs with brass accents. This piece can be purchased directly by contacting us here.

Blue gum console table

This hallway console table was designed specifically to emphasise the wonderful art that the clients had. With a very light turquoise transparent resin in the large void and matte black hoop legs, it stands 700mm tall and has a matte Danish oil finish.

Camphor Laurel, Burl and Blue Resin River console table #1

This hallway console table has a mix of transparent and opaque blue resin and matte black hairpin legs. This piece can be purchased directly by contacting us here.

Blue gum Bar

This blue gum bar/kitchen worktop was constructed in two pieces for the client that connect in an L-shape. With the bar being live edge on 3 sides and the piece that will be cut for the sink having live edges on the front and one end and a hard wearing danish oil finish, these counters should last for years and years.

Bar Table

Constructed from two layers of 25mm plywood mounted on a powdercoated steel base, this bar table is designed to be hard-wearing but beautiful as it is for a local wine bar; Cedar & Pine in Wynnum, Brisbane.

Electric Green River Console Table

These pieces of camphor laurel have been filled with electric green resin and mounted on matte black hoop steel legs. This console table stands 750mm tall and measures approximately 1070mm x 365mm. This piece can be purchased directly by contacting us here.

Topographical Bar

Created for a Craft Beer bar in Sydney, this set of bars (one long one at 4.8m and one L-shaped one at 3.3m on each side) has topographical maps of Katoomba and a section of the surrounding area routed into them to celebrate the origins of the company and the location of the first bar they opened. The contour lines have been filled with gold resin.

Camphor Laurel and Pink Resin River console table

This live-edge hallway console table was picked by a client who certainly wasn’t afraid of colour! With satin black X-legs, it stands 700mm tall, 1500mm wide and approximately 400mm deep. It has a satin finish.

Camphor Laurel and Blue Resin River console table #1

This hallway console table was designed to compliment the clients’ art and to fit snugly into this specific corner. With our most popular blue resin in the off-centre river and matte black X-legs, it stands 700mm tall, 1800mm wide and 450mm deep. It has a glossy Danish oil finish.

Shou Sugi Ban Cedar Console Table

This 150mm thick live edge block of hundred year old cedar has pewter filling the large voids and has been blackened using the Japanese technique of Shou Sugi Ban. Sealed with gloss lacquer and mounted on a steel tube frame, this will make a stunning statement piece for your home. This console table stands 780mm tall and measures 1535mm x 220-350mm deep. This piece can be purchased directly by contacting us here.

Redgum and Resin Hallway Table

This redgum and charred oak hallway table is shot through with brass details and completely encased in turquoise epoxy resin. The frame is Tasmanian Oak, charred using the Japanese technique of Shou Sugi Ban and sealed with gloss lacquer. Commissioned by a client, this piece now sits in the entrance foyer of their offices.

The Offcut Bar

A personal project; this bar (and the matching outdoor dining table that can be seen here) are made entirely of offcuts of just about every native Australian timber you can think of. Simple but very effective, these pieces are designed to survive outside in the harsh Australian climate.

Maple and Black Resin Bar Table

This maple top has a simple ironbark frame and is mounted on industrial casters so it’s as versatile as possible.

Cedar Bar/Reception/Desk

This 100mm thick live edge block of hundred year old cedar has black resin filling the few cracks in the top and is mounted on three matching solid cedar stump legs with black resin accents. Packed with beautiful “sun ray” features, this unbelievable piece is truly one of a kind. At nearly 4m long, it could be a reception desk, office desk or maybe even a bar in your ski lodge... This piece can be purchased directly by contacting us here.

Camphor Laurel and Blue Resin River console table #2

This hallway console table has our most popular blue resin in the off-centre river and matte black X-legs, it stands 700mm tall, 1200mm wide and 450mm deep. It has a satin finish.

Blackbutt Kitchen Island Bar

This blackbutt kitchen island bar compliments the main island by providing some warmth and contrast to the hard edged kitchen. Waterfall ends mirror the island and it’s perfect for at least 4 bar stools, making it the kitchen even more of a social space.